Subject	70 psi -- Wow I only checked mine around 30pzi
Posted by	SammybTT(TN) on February 20, 2014 at 12:41 PM
	This message has been viewed 138 times.
In Reply To	Here's something I did when I was concerned about one or posted by Evan_Wright (Ca) on February 20, 2014 at 11:11 AM
Message	Guess it depends on the maximum system operating pressure. I figured a leak would be discovered at any pressure but next time I will increase my testing pressure. This is good information. Thanks for sharing
Follow Ups	Testing for leaky or clogged injectors with plenum off - iamdan012 22:55:32 02/18/14 Have them cleaned and flow tested for $132 - 300ZMang 08:14:36 02/19/14 Here is how I have done it. - Woody75 (Denver) 11:34:02 02/19/14 ^^2nd Plumb the fuel rail and injectors to compressed air - SammybTT(TN) 12:04:50 02/19/14 Here's something I did when I was concerned about one or - Evan_Wright (Ca) 11:11:32 02/20/14 70 psi -- Wow I only checked mine around 30pzi - SammybTT(TN) 12:41:19 02/20/14 The stock system sees more than 30. - Woody75 (Denver) 09:28:06 02/21/14 Thanks Woody, I will use a higher pressure next time! (n/m) - SammybTT(TN) 21:38:07 02/21/14
Post a Followup	You cannot reply to this message because you are not logged in.