Subject	Testing for leaky or clogged injectors with plenum off
Posted by	iamdan012 on February 18, 2014 at 10:55 PM
	This message has been viewed 248 times.
Message	How would I go about doing so? Does the battery need to be hooked up? What else should be to make this process possible? Thanks for the help in advance. And I've seen the video by premier z but it didn't help me in figuring out all of it.
Follow Ups	Testing for leaky or clogged injectors with plenum off - iamdan012 22:55:32 02/18/14 Have them cleaned and flow tested for $132 - 300ZMang 08:14:36 02/19/14 Here is how I have done it. - Woody75 (Denver) 11:34:02 02/19/14 ^^2nd Plumb the fuel rail and injectors to compressed air - SammybTT(TN) 12:04:50 02/19/14 Here's something I did when I was concerned about one or - Evan_Wright (Ca) 11:11:32 02/20/14 70 psi -- Wow I only checked mine around 30pzi - SammybTT(TN) 12:41:19 02/20/14 The stock system sees more than 30. - Woody75 (Denver) 09:28:06 02/21/14 Thanks Woody, I will use a higher pressure next time! (n/m) - SammybTT(TN) 21:38:07 02/21/14
Post a Followup	You cannot reply to this message because you are not logged in.