Subject	2nd. With stock injectors I would say 15PSI. Make sure you
Posted by	YlwPrlZTT on January 15, 2014 at 5:24 PM
	This message has been viewed 195 times.
In Reply To	Re: Adjusting boost posted by JMartz on January 15, 2014 at 03:02 PM
Message	get an aftermarket boost gauge so you don't risk running too high of boost. Also I would recommend getting a wideband o2 gauge as running higher boost increases the change of detonation if your mixtrue runs too lean.
Follow Ups	Adjusting boost - Jm94tt300z 14:05:32 01/15/14 Re: Adjusting boost - JMartz 15:02:00 01/15/14 2nd. With stock injectors I would say 15PSI. Make sure you - YlwPrlZTT 17:24:52 01/15/14 Download and read your manual - not4resaleZ 19:10:59 01/15/14 ^^ 2nd as these EBC have several options available (n/m) - SammybTT(TN) 21:20:12 01/15/14
Post a Followup	You cannot reply to this message because you are not logged in.