Subject	Had a similar problem years ago
Posted by	Turbodog (CT) on January 15, 2014 at 4:01 PM
	This message has been viewed 352 times.
In Reply To	my z runs like crap after warm up. ...any clue ? posted by BlackTwins on January 15, 2014 at 01:49 AM
Message	Turned out to be the 2" long section of hose connecting the fuel pump to the bulkhead. It had become very soft and the crappy spring clamps couldn't hold fuel pressure when the pump gets 12v under boost. Replaced hose and used gear clamps and she went like a bat out of hell.
Follow Ups	my z runs like crap after warm up. ...any clue ? - BlackTwins 01:49:15 01/15/14 I wouldn't be flogging it while it's cold - 300ZMang 09:40:06 01/15/14 Have you checked the ECU codes? (n/m) - SammybTT(TN) 11:10:55 01/15/14 Re: Have you checked the ECU codes? - BlackTwins 19:56:59 01/15/14 http://z32.wikispaces.com/ECU+Diagnostics - SammybTT(TN) 21:26:03 01/15/14 Go to Auto Zone. But better to DIY. ECU on passanger> - ZUL8TR 06:22:31 01/16/14 I thought Auto Zone can only read OBD II? (n/m) - 300ZMang 10:23:16 01/17/14 Re: I wouldn't be flogging it while it's cold - BlackTwins 19:58:20 01/15/14 Had a similar problem years ago - Turbodog (CT) 16:01:27 01/15/14 Re: Had a similar problem years ago - BlackTwins 19:56:16 01/15/14 forgot to add, ran good when cold but as it warmed up - Turbodog (CT) 16:04:28 01/15/14 Re: forgot to add, ran good when cold but as it warmed up - BlackTwins 19:59:03 01/15/14 Inside the fuel tank on top of the pump (n/m) - Turbodog (CT) 18:21:19 01/16/14
Post a Followup	You cannot reply to this message because you are not logged in.