Subject	If you had a rod failure, you will probably need to check
Posted by	CmyZ on December 24, 2013 at 1:10 PM
	This message has been viewed 222 times.
In Reply To	please help with measuring main bearing clearences... posted by dyce_art on December 22, 2013 at 02:51 AM
Message	the rod journal and crankshaft journal also for deep grooves or scratches, you will also to have the crank mirror polished, if everything checks out to spec. Basically based on the information you provided, you will need grade 3 main bearings. Good luck.
Follow Ups	please help with measuring main bearing clearences... - dyce_art 02:51:04 12/22/13 Google "online 300zx manual" and there are charts that guide - ZaXxon 06:36:43 12/22/13 thats the problem ive gone throgh it. aI just am stuck on - dyce_art 00:50:02 12/23/13 EM-55 has a chart. Follow the chart to get the bearing - ZaXxon 12:28:55 12/23/13 If you had a rod failure, you will probably need to check - CmyZ 13:10:00 12/24/13 thanks for your help in doing my inspection of on the have - dyce_art 05:33:50 12/26/13 Not necessarily a new crank - -Grimm- 11:03:15 12/27/13
Post a Followup	You cannot reply to this message because you are not logged in.