| Message |
Had my PS door window (not quarter window broken out last week to steal my friend's bag out of the floor. I was lucky enough to find a guy in town that had an entire door, with the right tint, that I now have. The problem is, I don't really see how this new glass is going to back in. I got both doors pulled apart last night, cleaned up the glass, and started looking at both to figure out a gameplan, and ran out of time. The 2 bolts for the bottom of the window are a given. However, for the 2 side guide rails, the bolts are facing the wrong direction. I don't see how I'm going to get them on. Furthermore, I don't even see how the black piece thats on the oustside of the window as a guide is going to come off, let alone, how its going to get back on. Turning it seems to do nothing, and I don't want to break it. You can't even get to the back of it. Any tips or guides that I didn't find would be appreciated. The FSM has procedures for all the other glass, except the doors. I did find this guide, but I'm lost without the pictures: [ http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=1001642 ]
|
 |
