Subject	Re: You wont use pin 25
Posted by	krstull93 on November 07, 2013 at 4:09 PM
	This message has been viewed 129 times.
In Reply To	You wont use pin 25 posted by -Grimm- on November 07, 2013 at 02:17 PM
Message	On the pinout for the vg30 (30-6620 ems) it shows both pin 5 and 25 as a PW2 which is a "ground". Then hook the other terminal to a 12V switched. So the only thing I dont understand now is to use 25 or 5. Pin 25 was used on the stock solenoid so I just assumed that I could use it on this setup.
Follow Ups	wastegate actuator pins? - krstull93 10:25:29 11/07/13 Re: wastegate actuator pins? - -Grimm- 11:58:32 11/07/13 Re: Re: wastegate actuator pins? - krstull93 12:11:17 11/07/13 You wont use pin 25 - -Grimm- 14:17:14 11/07/13 Re: You wont use pin 25 - krstull93 16:09:37 11/07/13 I'm showing pin 5 as an A/T wire - -Grimm- 17:36:51 11/07/13
Post a Followup	You cannot reply to this message because you are not logged in.