Subject	Stereo electrical interference question.
Posted by	YlwPrlZTT on November 06, 2013 at 12:01 PM
	This message has been viewed 226 times.
Message	I recently installed 3 gauges in the din pod and hooked everything up to the radio wires(including ground) along with the radio itself. Everything works great except now I have a small buzzing sound in the speakers. It's not from the alternator as it doesn't change with RPM and it's not just the radio so it's not the antenna. Should I ground my stereo to a completely different ground? It is already grounded to the chassi but the other black wire is with all the other ones for the gauges. Any suggestions?
Follow Ups	Stereo electrical interference question. - YlwPrlZTT 12:01:40 11/06/13 Install a ground loop isolator - -Grimm- 12:38:25 11/06/13 thank you, i will look into that. (n/m) - YlwPrlZTT 14:19:05 11/06/13 I wired mine on there own fuse coming off the main wire to - LivinTheDream 17:34:59 11/06/13 I looked at those isolators and it looks like they all have - YlwPrlZTT 08:33:13 11/07/13 You're right, I called it the wrong thing - -Grimm- 09:18:06 11/07/13 Hmmm, there was a small box like that with my old stero but - YlwPrlZTT 12:33:25 11/07/13 And a link to buy it on ebay for $13 - -Grimm- 09:18:53 11/07/13 I just found out what i got is a choke coil and it is - YlwPrlZTT 14:45:45 11/07/13 Thats nearly the same thing. Used to suppress AC signals (n/m) - -Grimm- 15:49:32 11/07/13 Ok, then I guess I will be putting that thing back in. (n/m) - YlwPrlZTT 08:31:00 11/08/13
Post a Followup	You cannot reply to this message because you are not logged in.