TwinTurbo.NET: Nissan 300ZX forum - I pulled the cas and spun it by hand and the injector
Subject
I pulled the cas and spun it by hand and the injector
Posted by
Hydrus (Dallas)
on August 21, 2013 at 1:59 PM
This message has been viewed
197
times.
In Reply To
You haven't necessarily eliminated a fueling issue.
posted by Evan_Wright (Ca)
on August 20, 2013 at 07:06 PM
Message
did in fact click so would i still need to hook up an led?
Follow Ups
How can you tell if you have a "weak" spark?
-
Hydrus (Dallas)
13:31:19 08/20/13
Have you checked the spark plugs out?
-
-Grimm-
14:27:32 08/20/13
Yeah that was the first thing i did and had a visible spark
-
Hydrus (Dallas)
18:45:00 08/20/13
everytime I got no spark was a bad PTU or connection
-
Zvil (FL)
15:06:53 08/20/13
there is one rare exception
-
Zvil (FL)
15:09:50 08/20/13
how would i go about correcting the firing order? Ive alread
-
Hydrus (Dallas)
18:47:38 08/20/13
If I were you, I would first make sure there is continuity
-
Zvil (FL)
19:28:25 08/20/13
If your PTU subharness is crimp connected on
-
-Grimm-
09:57:22 08/21/13
when I say "crimp" I mean bend the tabs in the connector (n/m)
-
Zvil (FL)
11:01:10 08/21/13
Thanks ill be back with results! (n/m)
-
Hydrus (Dallas)
14:01:17 08/21/13
Is your PTU subharness still in place?
-
-Grimm-
09:42:26 08/23/13
how would i go about correcting the firing order? Ive alread
-
Hydrus (Dallas)
22:50:40 08/20/13
You haven't necessarily eliminated a fueling issue.
-
Evan_Wright (Ca)
19:06:46 08/20/13
I pulled the cas and spun it by hand and the injector -
Hydrus (Dallas)
13:59:59 08/21/13
Probably not. You seem to be doing a good job narrowing
-
Evan_Wright (Ca)
14:24:14 08/21/13
I really appreciate man. Ill post any new updates (n/m)
-
Hydrus (Dallas)
16:14:35 08/21/13
Results: No change at all. cleaned and crimped down all
-
Hydrus (Dallas)
14:18:52 08/22/13
Have any friends in Dallas with a spare ECU to try? (n/m)
-
-Grimm-
09:39:41 08/23/13
Post a
Followup
You cannot reply to this message because you are not
logged in
.