Subject	Re: Pull the plugs and put a 27mm socket on the crank
Posted by	SouthGaZ on August 21, 2013 at 12:15 PM
	This message has been viewed 199 times.
In Reply To	Pull the plugs and put a 27mm socket on the crank posted by Krazyd27(Houston) on August 21, 2013 at 11:40 AM
Message	Getting the starter tested first today when i get off then i will try that. Is thats clockwise or counter? If it rotates it should be fine right?
Follow Ups	Engine locked up? - SouthGaZ 11:05:34 08/21/13 Pull the plugs and put a 27mm socket on the crank - Krazyd27(Houston) 11:40:34 08/21/13 Re: Pull the plugs and put a 27mm socket on the crank - SouthGaZ 12:15:33 08/21/13 If it rotates its not seized (n/m) - -Grimm- 17:01:21 08/21/13 Rotate clockwise, looking at front of engine (n/m) - ZXoltan 04:04:37 08/22/13
Post a Followup	You cannot reply to this message because you are not logged in.