Subject	Anyone ever had an issue of a PCV hose cracked causing
Posted by	inf on August 12, 2013 at 7:03 PM
	This message has been viewed 294 times.
Message	high idle? 1100rpm? The brake cleaner method doesn't detect a vacuum leak as far as I can tell, but the boost leak method definitely produces a leak. I've tried all other ideas for this high idle including the TPS, other vacuum leaks, throttle body position, coolant sensor, iacv electrical tests...
Follow Ups	Anyone ever had an issue of a PCV hose cracked causing - inf 19:03:46 08/12/13 The Hoses never see Vacuum. - Cjw3 19:23:55 08/12/13 hmm...perhaps the hose is causing a venturi effect - inf 19:53:13 08/12/13 Crimp the iacv hose it will stall motor. if not theres a - 93 Blue Z32(NC) 23:06:32 08/12/13 after fixing the pcv hose I found some other leaks... - inf 13:05:04 08/13/13 nothing (n/m) - inf 13:21:02 08/13/13 it stalls (n/m) - inf 13:27:29 08/13/13 hmm, only one other leak as determined by a boost leak test - inf 13:35:32 08/13/13 ya for whatever reason I can't get this vehicle to idle - inf 15:50:40 08/13/13 hmm...i swapped the ecu with an auto trans tt federal - inf 16:16:43 08/13/13 weird..code 51...perhaps that's why the idle was funky.. - inf 16:20:27 08/13/13 chalkin this one up as a loss... - inf 18:34:03 08/13/13 clamp off until u get idle down to 650 and ck timing (n/m) - 93 Blue Z32(NC) 22:18:53 08/13/13 Re: air bypass hose from intake pipe also iv seen air - 93 Blue Z32(NC) 22:26:08 08/13/13 ya, i've had a sentra that a coilpack was killing the ecu - inf 13:36:24 08/14/13
Post a Followup	You cannot reply to this message because you are not logged in.