Subject	Injector connector read 12.4 volts. What am i missing here?
Posted by	Hydrus (Dallas) on July 31, 2013 at 5:41 PM
	This message has been viewed 334 times.
In Reply To	curious...whats the best way that you guys ohm injectors posted by genic on July 31, 2013 at 03:12 PM
Message	I dont understand. I have compression 152, fuel (it clicks when spinning the cas and 12.4 volts at the connector so i have power, and spark was visually verified by a budy when i cranked it over while the spark plug was grounded to the plenum. Any ideas guys? Maybe something i should retry. Ill check the spark again but what else?
Follow Ups	Difference of click loudness for nismo 615s? - Hydrus (Dallas) 21:53:23 07/28/13 Try ohm checking the injector (n/m) - Broke_as_**** 23:25:46 07/28/13 One of the first test i did. Right at 12.0. Wish it was out - Hydrus (Dallas) 01:39:30 07/29/13 What were the rest of them? - Broke_as_**** 13:32:43 07/29/13 All of the rest are 12.1 or 12.0 just like it. - Hydrus (Dallas) 19:48:19 07/29/13 Hard to say, not often if your fuel system is clean - Broke_as_**** 23:20:20 07/29/13 Wow forgot to check that. Is it the same procedure as - Hydrus (Dallas) 15:10:03 07/30/13 Either that or watch it with a meter while turning the CAS - Broke_as_**** 02:46:58 07/31/13 curious...whats the best way that you guys ohm injectors - genic 15:12:39 07/31/13 Injector connector read 12.4 volts. What am i missing here? - Hydrus (Dallas) 17:41:29 07/31/13 Have you done a boost leak test? - Broke_as_**** 02:44:09 08/01/13 Re: Have you done a boost leak test? - Hydrus (Dallas) 22:58:12 08/01/13 Before replacing - Broke_as_**** 23:47:01 08/01/13 Ill email you pics right now. Pretty straight forward but i - Hydrus (Dallas) 17:42:38 07/31/13
Post a Followup	You cannot reply to this message because you are not logged in.