Subject	Hard to say, not often if your fuel system is clean
Posted by	Broke_as_**** on July 29, 2013 at 11:20 PM
	This message has been viewed 290 times.
In Reply To	All of the rest are 12.1 or 12.0 just like it. posted by Hydrus (Dallas) on July 29, 2013 at 07:48 PM
Message	That said I had some cleaned after ~30,000 miles of use and they had picked up a few percentage difference across the board, didn't have any drop though. Are you getting the same voltage to that injector through the wiring harness as the others?
Follow Ups	Difference of click loudness for nismo 615s? - Hydrus (Dallas) 21:53:23 07/28/13 Try ohm checking the injector (n/m) - Broke_as_**** 23:25:46 07/28/13 One of the first test i did. Right at 12.0. Wish it was out - Hydrus (Dallas) 01:39:30 07/29/13 What were the rest of them? - Broke_as_**** 13:32:43 07/29/13 All of the rest are 12.1 or 12.0 just like it. - Hydrus (Dallas) 19:48:19 07/29/13 Hard to say, not often if your fuel system is clean - Broke_as_**** 23:20:20 07/29/13 Wow forgot to check that. Is it the same procedure as - Hydrus (Dallas) 15:10:03 07/30/13 Either that or watch it with a meter while turning the CAS - Broke_as_**** 02:46:58 07/31/13 curious...whats the best way that you guys ohm injectors - genic 15:12:39 07/31/13 Injector connector read 12.4 volts. What am i missing here? - Hydrus (Dallas) 17:41:29 07/31/13 Have you done a boost leak test? - Broke_as_**** 02:44:09 08/01/13 Re: Have you done a boost leak test? - Hydrus (Dallas) 22:58:12 08/01/13 Before replacing - Broke_as_**** 23:47:01 08/01/13 Ill email you pics right now. Pretty straight forward but i - Hydrus (Dallas) 17:42:38 07/31/13
Post a Followup	You cannot reply to this message because you are not logged in.