Subject	Difference of click loudness for nismo 615s?
Posted by	Hydrus (Dallas) on July 28, 2013 at 9:53 PM
	This message has been viewed 371 times.
Message	Currently chasing down a dead cylinder. Cylinder #2 to be exact. Good spark, compression at 152 dry and new orings for that injector. While pulling to cas to spin by hand, all of the injectors clicked perfectly, but the dead cylinder injector click significantly softer. Could this be a dead giveaway (charles ramsey pun not intended) of my injector malfunctioning?
Follow Ups	Difference of click loudness for nismo 615s? - Hydrus (Dallas) 21:53:23 07/28/13 Try ohm checking the injector (n/m) - Broke_as_**** 23:25:46 07/28/13 One of the first test i did. Right at 12.0. Wish it was out - Hydrus (Dallas) 01:39:30 07/29/13 What were the rest of them? - Broke_as_**** 13:32:43 07/29/13 All of the rest are 12.1 or 12.0 just like it. - Hydrus (Dallas) 19:48:19 07/29/13 Hard to say, not often if your fuel system is clean - Broke_as_**** 23:20:20 07/29/13 Wow forgot to check that. Is it the same procedure as - Hydrus (Dallas) 15:10:03 07/30/13 Either that or watch it with a meter while turning the CAS - Broke_as_**** 02:46:58 07/31/13 curious...whats the best way that you guys ohm injectors - genic 15:12:39 07/31/13 Injector connector read 12.4 volts. What am i missing here? - Hydrus (Dallas) 17:41:29 07/31/13 Have you done a boost leak test? - Broke_as_**** 02:44:09 08/01/13 Re: Have you done a boost leak test? - Hydrus (Dallas) 22:58:12 08/01/13 Before replacing - Broke_as_**** 23:47:01 08/01/13 Ill email you pics right now. Pretty straight forward but i - Hydrus (Dallas) 17:42:38 07/31/13
Post a Followup	You cannot reply to this message because you are not logged in.