Subject	Have you set your TPS Voltage?
Posted by	Cjw3 on July 23, 2013 at 7:51 PM
	This message has been viewed 344 times.
In Reply To	Second Emissions Test in VA Failed (but much better) posted by tomsbradford on July 23, 2013 at 06:10 PM
Message	The Ignition will not park, untill the TPS triggers the Idle Mode in the ECU. Before that the timing will drift around.. 1. get the .45 from TPS. 2. turn off the car. -->Disconnect the TPS<-- The Dangly one. 3. start the car, I let it run for a bit then plug in the TPS connector. It should snap down to Idle Speed This is what works for me.. then I can set the Idle Timing.. Cj
Follow Ups	Second Emissions Test in VA Failed (but much better) - tomsbradford 18:10:48 07/23/13 was your engine warmed up properly before adjusting timing? (n/m) - aliaZ 18:34:51 07/23/13 Can't say for sure, - tomsbradford 19:20:01 07/23/13 Have you set your TPS Voltage? - Cjw3 19:51:12 07/23/13 I like it when you talk that way - what does it mean? - tomsbradford 17:54:56 07/28/13 Re: I like it when you talk that way - what does it mean? - tomsbradford 11:06:08 07/31/13 Run the car hard immediately before testing - Polish 20:11:32 07/23/13
Post a Followup	You cannot reply to this message because you are not logged in.