Subject	This is what you need to do.
Posted by	DVDBURN (MD) on June 14, 2013 at 3:17 PM
	This message has been viewed 226 times.
In Reply To	ignition on power source posted by ouikikazz on June 12, 2013 at 10:14 PM
Message	Buy a relay like the one at this ebay link and run a 14-16 gage wire from the relay normally open contacts to the second fuel pump B+ and the car battery. Be sure to put a fuse in line close to the pump. For the relay coil to activate it, run one side to ground and the other side to the wire that feeds ECU pin 45. Now when you start the car the relay will feed the high current needed for the fuel pump directly from the battery via the relay. [ http://www.ebay.com/itm/30-40-AMP-RELAY-HEAVY-DUTY-WITH-WIRE-HARNESS-12-VOLT-5-PRONG-SPDT-BOSCH-/271174907007?pt=US_Relays_Sensors&hash=item3f2348b47f ] www.mytwinturbo.com Nissan Data Voice - The first Nissan diagnostic software with a voice! Nissan Data Voice on YouTube Download my Nissan 300ZX Vin/Model Lookup. Watch an ECZA meet caravan!
Follow Ups	ignition on power source - ouikikazz 22:14:20 06/12/13 the clock and radio both have permanent lives - Medallion Man 01:57:41 06/13/13 Any reason you don't just use the existing fuel pump power? - ZaXxon 07:18:19 06/14/13 Re: Any reason you don't just use the existing fuel pump power? - ouikikazz 12:36:05 06/14/13 This is what you need to do. - DVDBURN (MD) 15:17:54 06/14/13
Post a Followup	You cannot reply to this message because you are not logged in.