Subject	You are getting juice, but not enough, so it's not a relay
Posted by	zellamay on June 12, 2013 at 12:14 PM
	This message has been viewed 213 times.
In Reply To	First start after rebuild, car wont crank posted by Stanky on June 12, 2013 at 12:30 AM
Message	or a switch. It's either the battery or the wire/connections. Could be the starter. I'd check that by testing it out of car. If it spins freely, it's "probably" okay. A battery can show 12v, but not have enough cranking power. Any shop will test it for free.
Follow Ups	First start after rebuild, car wont crank - Stanky 00:30:51 06/12/13 is this a test start or is everything connected? - Medallion Man 03:13:18 06/12/13 everything is connected. fuses are good - Stanky 09:28:11 06/12/13 Manually turn the engine over by the crankshaft pulley - SammybTT(TN) 11:47:07 06/12/13 crankshaft spins feely, and I gave the starter a tap - Stanky 12:55:19 06/12/13 Manually turn the engine over by the crankshaft pulley - SammybTT(TN) 08:00:45 06/13/13 You are getting juice, but not enough, so it's not a relay - zellamay 12:14:02 06/12/13 Try battery charger in 'Start' mode or a jump (n/m) - ThisIsSparTTa 12:23:52 06/12/13
Post a Followup	You cannot reply to this message because you are not logged in.