| Message |
So I had to roll the Z down a hill today to get it running, wouldn't start. All of the dash lights and acessories come on, but nothing from the starter. Ran fine after I jumped it down the hill. So it's in the garage now, I checked the starter relay and I get 12V from each Black/White wire going into the relay but only 80 millivolts coming out of the Black/Yellow wire. I was expecting to get 0 out of the Black/Yellow wire coming out of the relay. I know 80 millivolts is pretty close to 0 but I was expecting a clean break, no voltage. Is this pretty normal for a failed starter relay? Also is there a TSB or revised part number for the starter relay? I'm in the middle of a move and the WiFi is down and I have terrible service so any help would be appreciated.
|
 |
