Subject	Can't set timing correctly
Posted by	Glooj on May 28, 2013 at 12:09 PM
	This message has been viewed 215 times.
Message	When I try to adjust the timing on my 91 TT, the closest I can get is about 22-24 degrees. This is with the CAS turned all the way to the right (retarded). I am using cylinder number one as the pickup, not the PTU loop. I know the CAS is functioning properly; when I took it out and manually turned it I could hear and injectors firing. The car runs poorly and is low on power. Could this be from a slipped tooth on the timing belt? Or something else? Thanks
Follow Ups	Can't set timing correctly - Glooj 12:09:57 05/28/13 Is this with a aftermarket crank pulley? Engine warmed up? - Evan_Wright (Ca) 16:37:05 05/28/13 Yes it can be timing belt issue, to verify it... - puchy 10:02:00 05/30/13 Re: Yes it can be timing belt issue, to verify it... - Glooj 23:43:48 05/30/13 Also; stock crank pulley (n/m) - Glooj 23:45:14 05/30/13 Have you tried placing a spark plug wire between the end - Evan_Wright (Ca) 09:28:04 05/31/13
Post a Followup	You cannot reply to this message because you are not logged in.