Subject	If the clamp on the right is loose enough
Posted by	RoidRage76 on April 28, 2013 at 10:52 AM
	This message has been viewed 229 times.
In Reply To	Thank you very much gentlemen posted by cHiNgLeZ on April 23, 2013 at 05:55 PM
Message	You might be able to make a hook from a coat hanger and spin the clamp to a spot where you can reach the screw. I did that with mine and used a screwdriver with a flexible shaft to tighten it. Saved me several hours of work.
Follow Ups	Fuel Leak Under Throttle Cable Cover - cHiNgLeZ 00:24:20 04/22/13 That hose is known as the bastard hose - ttsmokin 00:47:10 04/22/13 Agreed... common issue. (and a nasty job, but do-able) (n/m) - Medallion Man 02:52:06 04/22/13 Re: Fuel Leak Under Throttle Cable Cover - ZTom 13:09:00 04/22/13 Tom, I'm not sure you've understood or are making yourself - Medallion Man 14:38:45 04/22/13 you will have to register to view... this: - Medallion Man 14:53:50 04/22/13 Re: you will have to register to view... this: - ZTom 16:44:55 04/22/13 Don't need to do it this harder way - see this write-up... - jzack 17:52:05 04/22/13 Thank you very much gentlemen - cHiNgLeZ 17:55:30 04/23/13 If the clamp on the right is loose enough - RoidRage76 10:52:33 04/28/13
Post a Followup	You cannot reply to this message because you are not logged in.