Subject	I'm lowered to the .8" mark same as Eibach for now.
Posted by	SMAZ (OKC) on April 23, 2013 at 2:20 PM
	This message has been viewed 149 times.
In Reply To	Camber plates don't work on our Z posted by ttsmokin on April 23, 2013 at 01:31 PM
Message	It's not so much the springs I think as the valving being too high. Why not make them a bit softer and let people dial them up into the 8-10 to 12-15 range for more stiffness. I've contacted Charles with the same question. And yes, we have some of the worst roads in the country here in OKC. As for the flex, it was due to how tight the bolt was, but just curious if someone had experience with that. I would assume at 140K miles they're pretty worn, however performance was excellent. 1996 TT #61 of 300
Follow Ups	Strut Gas leak question during coilover install - SMAZ (OKC) 09:25:54 04/23/13 Camber plates don't work on our Z - ttsmokin 13:31:46 04/23/13 I'm lowered to the .8" mark same as Eibach for now. - SMAZ (OKC) 14:20:32 04/23/13 To specify you're talking about top mount camber plates? - white22sky 17:05:30 04/23/13 Yeah top mount. 300degree camber shims work for sure! (n/m) - ttsmokin 17:06:49 04/23/13 Yes, sorry 300 degrees of camber protection! (n/m) - SMAZ (OKC) 18:52:50 04/23/13 lol. Not really but nice wording. (n/m) - white22sky 07:46:24 04/24/13
Post a Followup	You cannot reply to this message because you are not logged in.