Subject	You don't have to have a aftermarket flywheel with SouthBend
Posted by	Joe@ZSpeedperformance on April 14, 2013 at 1:04 PM
	This message has been viewed 214 times.
In Reply To	Re: My .02 posted by hellraz0r1337 on April 12, 2013 at 10:24 AM
Message	Only if you use the X series kit is it required. South Bend has options for and configuration of clutch for the Z32. If you need help feel free to contact us.
Follow Ups	Slipping clutch (master or actually the clutch) - hellraz0r1337 09:52:56 04/12/13 My .02 - Summeronthechain (MN) 10:07:05 04/12/13 Re: My .02 - hellraz0r1337 10:24:25 04/12/13 You don't have to have a aftermarket flywheel with SouthBend - Joe@ZSpeedperformance 13:04:23 04/14/13 Is my friction disk worn to far down? - hellraz0r1337 11:53:45 04/12/13 You have described 2 problems: slipping clutch and - zellamay 11:57:36 04/12/13 Re: You have described 2 problems: slipping clutch and - hellraz0r1337 12:05:59 04/12/13 Im looking at this clutch for my setup. - hellraz0r1337 15:52:30 04/12/13 It's hard to tell, but from pics your disk looks fine. - TriniTT 16:08:40 04/12/13 Thats a Centerforce Dual Friction Clutch. - nonstopna 16:21:51 04/12/13 Re: Thats a Centerforce Dual Friction Clutch. - hellraz0r1337 13:53:41 04/13/13 Are you basing this on the pressure plate stamping? - TriniTT 14:50:22 04/15/13 Agreed, I had this clutch in my TT. - TriniTT 14:53:01 04/15/13
Post a Followup	You cannot reply to this message because you are not logged in.