Subject	Re: You have described 2 problems: slipping clutch and
Posted by	hellraz0r1337 on April 12, 2013 at 12:05 PM
	This message has been viewed 229 times.
In Reply To	You have described 2 problems: slipping clutch and posted by zellamay on April 12, 2013 at 11:57 AM
Message	okie dokie well than that leads me onto one other question. We have diagnosed 2 worn out parts. Both will be replaced. Now this is my DD and im not looking for a racecar clutch but also a clutch that will be occasionally dragable and streetable. ALSO must match up with stock flywheel that has been resurfaced with the .08" step
Follow Ups	Slipping clutch (master or actually the clutch) - hellraz0r1337 09:52:56 04/12/13 My .02 - Summeronthechain (MN) 10:07:05 04/12/13 Re: My .02 - hellraz0r1337 10:24:25 04/12/13 You don't have to have a aftermarket flywheel with SouthBend - Joe@ZSpeedperformance 13:04:23 04/14/13 Is my friction disk worn to far down? - hellraz0r1337 11:53:45 04/12/13 You have described 2 problems: slipping clutch and - zellamay 11:57:36 04/12/13 Re: You have described 2 problems: slipping clutch and - hellraz0r1337 12:05:59 04/12/13 Im looking at this clutch for my setup. - hellraz0r1337 15:52:30 04/12/13 It's hard to tell, but from pics your disk looks fine. - TriniTT 16:08:40 04/12/13 Thats a Centerforce Dual Friction Clutch. - nonstopna 16:21:51 04/12/13 Re: Thats a Centerforce Dual Friction Clutch. - hellraz0r1337 13:53:41 04/13/13 Are you basing this on the pressure plate stamping? - TriniTT 14:50:22 04/15/13 Agreed, I had this clutch in my TT. - TriniTT 14:53:01 04/15/13
Post a Followup	You cannot reply to this message because you are not logged in.