Subject	I used JECS injectors with my rebuild
Posted by	SammybTT(TN) on March 18, 2013 at 11:42 AM
	This message has been viewed 335 times.
In Reply To	Injector help posted by GotTwins90 on March 16, 2013 at 05:19 PM
Message	It was a more cost effective option and JECS is the manufacturer of the Nissan and NISMO injectors. That is what I discovered during my research. I got the JECS 550 injectors versus the NISMO 555 (615) injectors. They came as a matched set with flow data sheets. So far so good after about 1000 miles
Follow Ups	Injector help - GotTwins90 17:19:05 03/16/13 If just staying stock, no ECU upgrades, etc -- I'd just - jzack 18:00:59 03/16/13 Re: If just staying stock, no ECU upgrades, etc -- I'd just - GotTwins90 19:18:33 03/16/13 Others can chime in but unless you are changing the ECU tune - jzack 19:46:45 03/16/13 Re: Others can chime in but unless you are changing the ECU tune - GotTwins90 22:37:10 03/16/13 Like most Z engine work - it's mostly time consuming.. - jzack 22:53:38 03/16/13 If you are staying stock, get Bernie's kit - BlackholeZ 12:10:24 03/17/13 That's perfect. Thanks! (n/m) - GotTwins90 13:54:18 03/17/13 I used JECS injectors with my rebuild - SammybTT(TN) 11:42:10 03/18/13 Is it possible it could just be dirty? - GotTwins90 20:32:28 03/18/13 Use a digital multimeter and check the resistance - SammybTT(TN) 21:11:53 03/18/13
Post a Followup	You cannot reply to this message because you are not logged in.