Subject	Injector help
Posted by	GotTwins90 on March 16, 2013 at 5:19 PM
	This message has been viewed 181 times.
Message	I have 1 bad injector so if im going to go through all the trouble to remove the plenum i might as well replace all of them. I'm going to stay stock 370cc. What are some good ones and bad ones? or is stock OEM the way to go? I realize cheap does not exist but not break the bank. Also with injectors is it swap them and good to go or do new o rings, gaskets etc need to be replaced as well? This is a new area in my knowledge
Follow Ups	Injector help - GotTwins90 17:19:05 03/16/13 If just staying stock, no ECU upgrades, etc -- I'd just - jzack 18:00:59 03/16/13 Re: If just staying stock, no ECU upgrades, etc -- I'd just - GotTwins90 19:18:33 03/16/13 Others can chime in but unless you are changing the ECU tune - jzack 19:46:45 03/16/13 Re: Others can chime in but unless you are changing the ECU tune - GotTwins90 22:37:10 03/16/13 Like most Z engine work - it's mostly time consuming.. - jzack 22:53:38 03/16/13 If you are staying stock, get Bernie's kit - BlackholeZ 12:10:24 03/17/13 That's perfect. Thanks! (n/m) - GotTwins90 13:54:18 03/17/13 I used JECS injectors with my rebuild - SammybTT(TN) 11:42:10 03/18/13 Is it possible it could just be dirty? - GotTwins90 20:32:28 03/18/13 Use a digital multimeter and check the resistance - SammybTT(TN) 21:11:53 03/18/13
Post a Followup	You cannot reply to this message because you are not logged in.