Subject	Spark plug gap
Posted by	GotTwins90 on March 14, 2013 at 6:36 PM
	This message has been viewed 1093 times.
Message	What is the proper gap for 14psi of boost? Ive tried this three times and still cant quite get it right. First I tried .035 and it ran like crap. Idle was wack and zero power. Than i tried .040. Was a bit better but still not there. Now im at .037. Runs descent but there is a real rough spot around 1100rpm than stops beyond that. Also the rpm needle doesn't jump but the tone at idle sounds like its choking on it self? Thoughts?
Follow Ups	Spark plug gap - GotTwins90 18:36:44 03/14/13 What plugs are you using? - JonnyZ(SoCal) 19:07:38 03/14/13 NGK-pfr6b-11b - GotTwins90 20:44:41 03/14/13 It doesn't work like that - ttsmokin 21:09:19 03/14/13 Re: It doesn't work like that - GotTwins90 17:56:58 03/16/13 0.035" for Stage 3 (n/m) - ttsmokin 22:19:47 03/16/13 Greg @ SZ Definitively Said to use .035 @ 14PSI - ThisIsSparTTa 08:55:27 03/21/13
Post a Followup	You cannot reply to this message because you are not logged in.