Subject	Dumb Q: Will a "code" always fire the CEL light permanently
Posted by	evan_aggie on March 14, 2013 at 1:42 PM
	This message has been viewed 176 times.
In Reply To	Code 43 (TPS)...could the IAA/IACV cause this? posted by NismoDHS on March 13, 2013 at 09:45 PM
Message	I had jumped some pins directly on the consult cable and saw no flashing light even though my car has some idle issues at the moment. I haven't yet gone to the ECU, but supposedly jumping the wires on the consult connect was supposed to be identical to turning the screw on the ECU to the right for 2 seconds and then back to the left.
Follow Ups	Code 43 (TPS)...could the IAA/IACV cause this? - NismoDHS 21:45:00 03/13/13 TPS/idle adjustment - wickdGSXR 22:25:58 03/13/13 Yeah, those are the steps I'm going to take once I order & - NismoDHS 07:43:10 03/14/13 Dumb Q: Will a "code" always fire the CEL light permanently - evan_aggie 13:42:58 03/14/13 Not all codes will throw a CEL. - white22sky 13:55:20 03/14/13 So if you jump those wires on the at the consult terminal - evan_aggie 14:42:04 03/14/13 Yess, that I corrrect. Place jumper wire in for a few - white22sky 15:10:30 03/14/13 **is** (n/m) - white22sky 15:11:04 03/14/13 Weird, the ECU light works and CEL when I activate via the - evan_aggie 10:22:35 03/15/13 It will adjust for certain conditions. - white22sky 10:46:58 03/15/13 After replacing the vac caps, no driving. I just idled in - evan_aggie 11:23:14 03/15/13 Ok so you drove home with it no aware your caps were - white22sky 16:01:43 03/15/13 **not** - white22sky 16:43:53 03/15/13
Post a Followup	You cannot reply to this message because you are not logged in.