Subject	READ
Posted by	LivinTheDream on March 04, 2013 at 11:23 PM
	This message has been viewed 366 times.
In Reply To	How do you replace crimped PS Reservoir Hoses ? posted by OverZealous (CT) on March 04, 2013 at 10:56 PM
Message	I had everything typed and randomly everything went bye bye. Anyways here I go again. I replaced both the hose you are referring to and the hardline it connects to as well as the hose on the other end of that hardline. I HATE PS leaks and after cutting the crimp and installing the new hose to then see both of the hoses magically start leaking I decided to kill it all and make up an -6AN line. Using compression fittings that go right on to the PS res and hardline that comes of the steering rack. I'll post pics in due time but basically its the compression fitting onto the ps res intake hardline/ straight AN hose end/ 3.5ft of -6AN braided hose/ 90 degree hose end/ compression fitting onto the hardline down at the rack. "torque gets you off the line...& hp gets you over the line." - TTKeeper
Follow Ups	How do you replace crimped PS Reservoir Hoses ? - OverZealous (CT) 22:56:05 03/04/13 Cut the crimp off. (n/m) - Woody75 (Denver) 22:58:02 03/04/13 READ - LivinTheDream 23:23:45 03/04/13 Did this happen to anyone else out here on TT.net? - OverZealous (CT) 06:44:23 03/05/13 I haven't had any leaks with the replacement hose and clamps - Evan_Wright (Ca) 13:48:53 03/05/13 Did you use OEM clamps? (n/m) - OverZealous (CT) 14:20:37 03/05/13 Yes I did - Evan_Wright (Ca) 20:26:07 03/05/13 Thanks for the post & pic (n/m) - OverZealous (CT) 22:18:25 03/05/13 Re: Did this happen to anyone else out here on TT.net? - LivinTheDream 23:36:36 03/05/13 i cut it off with my dremel. (n/m) - slayer fan 00:26:08 03/05/13 Likewise, cut the crimps, replaced with 3/8" Hydraulic Hose - ZinnZ32 16:27:21 03/05/13 Same. ~$20. (n/m) - BoneZ (MD) 20:46:30 03/05/13
Post a Followup	You cannot reply to this message because you are not logged in.