Subject	Problem solved! (info in box)
Posted by	Zinprogress on February 25, 2013 at 4:59 PM
	This message has been viewed 289 times.
In Reply To	Bleeding posted by Zinprogress on February 21, 2013 at 10:39 PM
Message	Alright so I wasnt getting pressure in the rear heater hoses basically. Found out my heater valve was stuck shut so the coolant wouldn't get past. (for anyone not familiar I was skeptical at first too) So since my heater box is already screwed up I took the spring off and manually opened the valve. I took off the rear hoses and poured coolant in the heater core and rear of engine to try and push air and add volume. For anyone that is looking on google for this problem and come across this that is how I fixed it! This is all thanks to Tim (woody75) who has helped me a lot and inspired me to finish/ work on my car and is over all a pure badass!
Follow Ups	Heater/ heating problem - Zinprogress 21:21:19 02/16/13 Re: Heater/ heating problem - someotherguy 21:33:41 02/16/13 Re: Re: Heater/ heating problem - Zinprogress 21:38:38 02/16/13 Your post is very hard to follow. - Summeronthechain (MN) 22:22:26 02/16/13 Re: Your post is very hard to follow. - Zinprogress 23:59:20 02/16/13 Sounds to me like there's a clog somewhere? I would guess - jzack 09:05:36 02/17/13 I feel air flow - Zinprogress 11:42:26 02/17/13 Well then, perhaps a block on the engine side? - jzack 16:17:58 02/17/13 No block just no pressure - Zinprogress 16:32:04 02/17/13 Maybe bad water pump ? (n/m) - jlag 09:16:08 02/18/13 I don't think so... - Zinprogress 15:54:09 02/18/13 Really comes down to one of four basic issues... - jzack 17:53:25 02/18/13 4 basic problems... - Zinprogress 08:56:40 02/20/13 My no heat problem is the blend door - BigZness 11:51:57 02/20/13 Bleeding - Zinprogress 22:39:00 02/21/13 Problem solved! (info in box) - Zinprogress 16:59:26 02/25/13 You're welcome. - Woody75 (Denver) 15:05:06 02/26/13 I got rid of it... Only thing I didn't take out was thheater - Zinprogress 22:57:46 02/27/13
Post a Followup	You cannot reply to this message because you are not logged in.