Subject	Smoke after boost need some help....
Posted by	ShakaShaun(Denver) on January 24, 2013 at 7:53 PM
	This message has been viewed 180 times.
Message	Ok, so I replaced the CHRA's on my sport 500's new manifolds, and upon replacing them noticed burnt oil inside the drivers side manifold heat shield. Driving it 80 miles post chra replacement have lots of oil smoke after a hard boost pull. Got it up in the air. Looks like oil is still dripping from the DS manifold. Boost leak check will not build pressure. I'm thinking a valve issue. any input? Good people drink good beer.
Follow Ups	Smoke after boost need some help.... - ShakaShaun(Denver) 19:53:14 01/24/13 Sound like a valve seal to me. Does it smoke at all on cold - Josh91CRPTT 20:17:18 01/24/13 Just hot after boost. Driving around normal no smoke. (n/m) - ShakaShaun(Denver) 20:58:20 01/24/13 Well this is what my Z started to do last year and it ended - Josh91CRPTT 21:57:10 01/24/13 Re: Well this is what my Z started to do last year and it ended - revolutionary 11:28:36 01/27/13 Except the GT600R needs a restrictor and the stock or - ZXoltan 16:25:49 01/28/13 ShakaShaun, check the bottom of your CHRAs from underneath - Krazyd27(Houston) 18:01:16 01/25/13 No oil. Only have 90 miles on them. (n/m) - ShakaShaun(Denver) 21:21:58 01/25/13 Make sure your PCV valves are working (n/m) - njz 08:20:07 01/27/13 brand new valves, blew out all the lines. (n/m) - ShakaShaun(Denver) 11:13:14 01/27/13
Post a Followup	You cannot reply to this message because you are not logged in.