Subject	Start by soaking with penetrating oil, twice a day
Posted by	JMartz on November 27, 2012 at 7:43 AM
	This message has been viewed 185 times.
In Reply To	Turbo help posted by TheMarlin (MidTN) on November 26, 2012 at 08:31 PM
Message	for a week. If driver side you may have to drop the cross member to gain access. slotting and screw driver may work. if not center drilling and easy out. if not full drilling and helicoil. Doing the full drilling w/o a drill press, vise and loose parts will result in poor alignment. Your choice...
Follow Ups	Turbo help - TheMarlin (MidTN) 20:31:13 11/26/12 The bolt on the right side of the pic, not the stud (left). (n/m) - TheMarlin (MidTN) 20:32:29 11/26/12 Info - Broke_as_**** 20:52:32 11/26/12 Re: Turbo help - njz 07:37:04 11/27/12 Start by soaking with penetrating oil, twice a day - JMartz 07:43:59 11/27/12 Mine did same thing on stock turbo years ago - Drk93TT 08:12:01 11/27/12 I did the same thing, ended up having to get it drilled out - LJZTT 11:52:42 11/27/12 might be time to pull the motor!!!! - tacozzz 16:13:28 11/29/12
Post a Followup	You cannot reply to this message because you are not logged in.