Subject	Turbo help
Posted by	TheMarlin (MidTN) on November 26, 2012 at 8:31 PM
	This message has been viewed 331 times.
Message	So the head of one of the bolts holding the DP to the turbo torqued off. I need to get the rest of the bolt out of the turbo housing so I can replace it. I need some ideas on how to get it out. Here's a pic: I was thinking I might be able to use a dremel to make a slot in the part of the bolt that is sticking out and use that to loosen it. Thinking that could work. Also was wondering if it was possible to remove that part of the turbo housing with the turbo still on the car. Any suggestions or ideas are welcome.
Follow Ups	Turbo help - TheMarlin (MidTN) 20:31:13 11/26/12 The bolt on the right side of the pic, not the stud (left). (n/m) - TheMarlin (MidTN) 20:32:29 11/26/12 Info - Broke_as_**** 20:52:32 11/26/12 Re: Turbo help - njz 07:37:04 11/27/12 Start by soaking with penetrating oil, twice a day - JMartz 07:43:59 11/27/12 Mine did same thing on stock turbo years ago - Drk93TT 08:12:01 11/27/12 I did the same thing, ended up having to get it drilled out - LJZTT 11:52:42 11/27/12 might be time to pull the motor!!!! - tacozzz 16:13:28 11/29/12
Post a Followup	You cannot reply to this message because you are not logged in.