Subject	Re: here you go tps mod is in there
Posted by	puchy on November 23, 2012 at 3:50 PM
	This message has been viewed 216 times.
In Reply To	here you go tps mod is in there posted by Krazyd27(Houston) on November 23, 2012 at 03:07 PM
Message	Thanks and I did look at that writeup and I thought I had to do that but my problem is a little different. He couldn't adjust the TPS below .66v. I can adjust below 45v. My problem is that the TPS's close switch won't read close above .28v in another words I can't adjust to .45v without the computer seeing the throttle open, hence not in idle. I'm out of ideas besides thinking the TPS is bad, because I did replace it about a month ago and the failure came up as soon as I replaced the throttle bodies.
Follow Ups	TPS close switch adjustment after 60mm install.... - puchy 14:31:52 11/23/12 There is a mod for it somewhere around here - Krazyd27(Houston) 14:56:09 11/23/12 here you go tps mod is in there - Krazyd27(Houston) 15:07:20 11/23/12 Re: here you go tps mod is in there - puchy 15:50:29 11/23/12 Re: here you go tps mod is in there - puchy 18:12:05 11/23/12 Try starting the car with the tps sensor(oval connector) - Evan_Wright (Ca) 20:01:25 11/23/12 Re: Try starting the car with the tps sensor(oval connector) - puchy 22:24:03 11/23/12 The Idle On status can be obtained by either the Idle Switch - Gordo 93TT Daytona 22:41:35 11/23/12 Re: The Idle On status can be obtained by either the Idle Switch - MaxxAction 23:48:24 11/23/12 Re: The Idle On status can be obtained by either the Idle Switch - puchy 11:13:30 11/24/12
Post a Followup	You cannot reply to this message because you are not logged in.