Subject	Re: Misfiring under boost.
Posted by	scottmt21 on October 25, 2012 at 6:04 PM
	This message has been viewed 280 times.
In Reply To	Misfiring under boost. posted by AsaHerring on October 24, 2012 at 05:50 PM
Message	I have seen a Z that would misfire and POP around only under boost and mostly at higher boost levels that turned out to be a couple of bad coil packs! the car would idle and drive great until the boost got over about 16 psi. (higher load on the coil packs) If everything else checks out you might try swapping the coil packs with a known good set. ;-)
Follow Ups	Misfiring under boost. - AsaHerring 17:50:45 10/24/12 Re: Misfiring under boost. - 300ZMang 22:16:22 10/24/12 Re: Re: Misfiring under boost. - Medallion Man 02:33:30 10/25/12 i think recommended pressure is no more than 6 psi? (n/m) - 300ZMang 12:01:03 10/25/12 Correct, unless you have modified your PCV system. - Drunkpunk082 14:13:28 10/25/12 Re: Misfiring under boost. - scottmt21 18:04:37 10/25/12
Post a Followup	You cannot reply to this message because you are not logged in.