Subject	Re: PS - Just throwing this out there but since you have a
Posted by	ZTom on October 23, 2012 at 11:08 AM
	This message has been viewed 153 times.
In Reply To	PS - Just throwing this out there but since you have a posted by jzack on October 23, 2012 at 09:34 AM
Message	My Z came with new style PTU. I replace it with brand new PTU the whole kit. If you look at the kit it come with new wire connector and relocation kit. I want to know if the six pins connector on the PTU control each individual coil pack connector? As in sending current through the coil pack connector and into the coil pack to make the spark plug spark. If one pin is not working then that coil pack would not get any spark. Thats what I wanted to know. Thanks for your help.
Follow Ups	Number 1 CYLINDER - ZTom 17:17:12 10/22/12 Did things work well before the harness swap? If so, - jzack 18:15:29 10/22/12 Re: Did things work well before the harness swap? If so, - ZTom 19:15:28 10/22/12 PTU drives the coil packs - get's it firing signal from - jzack 19:26:54 10/22/12 Re: PTU drives the coil packs - get's it firing signal from - Medallion Man 06:32:56 10/23/12 CAS provides the ECU with the timing signal to fire the - jzack 09:22:58 10/23/12 PS - Just throwing this out there but since you have a - jzack 09:34:46 10/23/12 Re: PS - Just throwing this out there but since you have a - ZTom 11:08:14 10/23/12 This diagram should help - the online Z32 factory manual - jzack 12:56:48 10/23/12 Re: CAS provides the ECU with the timing signal to fire the - ZTom 21:17:29 10/23/12 sounds to me like your PTU is fried - Zvil 07:13:28 10/23/12 Test everything as shown in the FSM, make sure he coils have - Supermario680 (WI) 15:04:35 10/23/12 And its possible, but I would think unlikely. Grab a meter - Supermario680 (WI) 15:07:17 10/23/12 Re: And its possible, but I would think unlikely. Grab a meter - ZTom 10:41:15 10/24/12
Post a Followup	You cannot reply to this message because you are not logged in.