Subject	Re: Did things work well before the harness swap? If so,
Posted by	ZTom on October 22, 2012 at 7:15 PM
	This message has been viewed 150 times.
In Reply To	Did things work well before the harness swap? If so, posted by jzack on October 22, 2012 at 06:15 PM
Message	My Z was running well after my friend and I rebuild the motor. Needed to be tune but was running fine. My friend took it to Z1 Motorsport to have them check why the upgraded injectors was not working correctly. We both are in the Army and got deploy to Iraq. Needless to say Z1 did somethinh to my Z and it never ran the way it did. So now I'm trying to fix the problem. So the PTU that have 6 pins connectors, is that the one that send signal to individual injectors? If it does that than maybe I should get a new one. Also I think Z1 fry my EFI harness cause my ECU circuit was fry which cause the car not to shut off. Now my ECU is working fine thanks to AZSPEC. The new PTU was hook to my old EFI harness.
Follow Ups	Number 1 CYLINDER - ZTom 17:17:12 10/22/12 Did things work well before the harness swap? If so, - jzack 18:15:29 10/22/12 Re: Did things work well before the harness swap? If so, - ZTom 19:15:28 10/22/12 PTU drives the coil packs - get's it firing signal from - jzack 19:26:54 10/22/12 Re: PTU drives the coil packs - get's it firing signal from - Medallion Man 06:32:56 10/23/12 CAS provides the ECU with the timing signal to fire the - jzack 09:22:58 10/23/12 PS - Just throwing this out there but since you have a - jzack 09:34:46 10/23/12 Re: PS - Just throwing this out there but since you have a - ZTom 11:08:14 10/23/12 This diagram should help - the online Z32 factory manual - jzack 12:56:48 10/23/12 Re: CAS provides the ECU with the timing signal to fire the - ZTom 21:17:29 10/23/12 sounds to me like your PTU is fried - Zvil 07:13:28 10/23/12 Test everything as shown in the FSM, make sure he coils have - Supermario680 (WI) 15:04:35 10/23/12 And its possible, but I would think unlikely. Grab a meter - Supermario680 (WI) 15:07:17 10/23/12 Re: And its possible, but I would think unlikely. Grab a meter - ZTom 10:41:15 10/24/12
Post a Followup	You cannot reply to this message because you are not logged in.