Subject	Plugs changed, no improvement.
Posted by	dan-o on October 17, 2012 at 10:05 PM
	This message has been viewed 143 times.
In Reply To	Check the connectors for oxidation posted by njz on October 16, 2012 at 11:40 AM
Message	Tried spraying brake kleen on the bases of the injectors, no results. I also tried swapping could from 1&3 to 2&4 to see if the problems followed the coil packs. No luck there either. Connectors looked fine. Next up is to try and get the injector connectors off and inspect.
Follow Ups	Misfires Continued, little further on diagnosis. - dan-o 19:45:30 10/15/12 Re: Misfires Continued, little further on diagnosis. - njz 20:47:02 10/15/12 Bosch Platinum FR7DPX (n/m) - dan-o 21:40:37 10/15/12 Z calls for NGK PFR6B-11B (n/m) - njz 22:19:37 10/15/12 NGK's ordered, will install tomorrow. (n/m) - dan-o 11:18:02 10/16/12 Re: Misfires Continued, little further on diagnosis. - Cjw3 21:24:27 10/15/12 Re: Re: Misfires Continued, little further on diagnosis. - Medallion Man 03:37:56 10/16/12 After I install new plugs, I'm going to swap the coil packs - dan-o 11:21:33 10/16/12 Check the connectors for oxidation - njz 11:40:03 10/16/12 Plugs changed, no improvement. - dan-o 22:05:42 10/17/12 Re: Check the connectors for oxidation - BlackTwins 22:56:09 10/17/12
Post a Followup	You cannot reply to this message because you are not logged in.