Subject	I tested the fuses per your method and
Posted by	1911a1 on October 04, 2012 at 5:07 PM
	This message has been viewed 280 times.
In Reply To	You can test a fuse while it is still plugged in. posted by Gordo 93TT Daytona on October 03, 2012 at 12:13 PM
Message	I had previously checked the voltage at the fuse socket and was getting voltage and the fuse tested good with an ohm meter. But when I followed your method, I wasn't getting voltage through the 10a Illumina fuse. I changed the fuse and problem solved. Fuses and lamps were the first thing I checked. I don't understand how a fuse would test good with a meter but not provide a voltage path. I don't think it was the fuse seating because I had it out twice. All is working properly now. Thanks for the help! Something new learned.
Follow Ups	No low beams and No tail lights ? - 1911a1 19:03:23 10/02/12 Re: No low beams and No tail lights ? - MrHypnotik 19:43:12 10/02/12 Re: Re: No low beams and No tail lights ? - MrHypnotik 19:48:47 10/02/12 10A Illumination fuse may be at fault - Drk93TT 19:49:49 10/02/12 Re: 10A Illumination fuse may be at fault - aroche 20:31:28 10/02/12 use a test light cuz the fuse may not look bad but is (n/m) - craigz96tt 10:50:16 10/03/12 You can test a fuse while it is still plugged in. - Gordo 93TT Daytona 12:13:10 10/03/12 Wait. Are you STUCK stuck on higbeams? There is a relay - Supermario680 (WI) 10:15:39 10/04/12 I tested the fuses per your method and - 1911a1 17:07:55 10/04/12 Now I am confused. (n/m) - Gordo 93TT Daytona 20:40:39 10/04/12 Re: I tested the fuses per your method and - Supermario680 (WI) 06:48:14 10/08/12
Post a Followup	You cannot reply to this message because you are not logged in.