Subject	300zx idling poorly after some work
Posted by	syphon0202 on August 03, 2012 at 10:05 AM
	This message has been viewed 265 times.
Message	Long story short, I took of the timing belt for 120k maintenance and pulled the plenum to rebuild the lifters. Put the lifters back in, replaced plenum, and didn't touch anything else for 2 months because I just didn't have any time. Last night I finally decided to just put the timing belt back on and start the car. Video of startup [ http://www.youtube.com/watch?v=rZWZXTMfvyo ] As soon as I finished with the video I turned the car off and haven't touched it since then. Does it sound like the timing is off? Or could this roughness just be from the car sitting untouched for 2 months? When we put the timing on we counted the teeth inbetween all the sprockets and everything looked to be in time. The timing marks (on the belt) were on directly on every notch on all 5 sprockets. On another note, the lifters are ticking too, would this also be caused by the car sitting for 2 months? I rebuilt and tested the lifters and they all felt great before going into the car. Thanks for any help/advice you can give!
Follow Ups	300zx idling poorly after some work - syphon0202 10:05:44 08/03/12 Re: 300zx idling poorly after some work - Stokens (StoMoZTT) 11:04:52 08/03/12 Re: Re: 300zx idling poorly after some work - syphon0202 12:28:31 08/03/12 Before you changed the TB did you check the timing>> - ZUL8TR 13:25:23 08/03/12 Re: Before you changed the TB did you check the timing>> - syphon0202 14:16:14 08/03/12 He is talking about using a timing light to make sure your - JonnyZ(SoCal) 14:20:20 08/03/12 Re: He is talking about using a timing light to make sure your - syphon0202 15:10:02 08/03/12 Sounds like it should be good as long as tensioner was set - JonnyZ(SoCal) 15:26:02 08/03/12 Re: Sounds like it should be good as long as tensioner was set - syphon0202 15:30:22 08/03/12 That should be fine. (n/m) - Summeronthechain (MN) 09:12:58 08/06/12 Claification: I mean using a timing light before the TB >> - ZUL8TR 06:47:42 08/04/12
Post a Followup	You cannot reply to this message because you are not logged in.