Subject	if your pump was recently replaced
Posted by	ZiNnYc on July 31, 2012 at 9:49 AM
	This message has been viewed 212 times.
In Reply To	Diagnosing a hard start posted by Silens on July 30, 2012 at 08:49 PM
Message	the small hoses that connect the pump to the bulkhead can be the culprit. even if they were replaced, if the wrong clamp was used, it can lead to pressure loss. remove the bulkhead and replace the clamps and hoses with Nissan OEMs and see if that helps. Greater NY area Z32 owner? Join the NYZC NYZC |
Follow Ups	Diagnosing a hard start - Silens 20:49:40 07/30/12 if your pump was recently replaced - ZiNnYc 09:49:06 07/31/12 Re: if your pump was recently replaced - Silens 10:36:09 07/31/12 clamps look good...have you bypassed your damper yet (n/m) - ZiNnYc 12:37:32 07/31/12 Re: clamps look good...have you bypassed your damper yet - Silens 12:50:31 07/31/12 diagnostic, see if it helps - ZiNnYc 14:50:07 07/31/12 Re: diagnostic, see if it helps - Silens 17:10:03 08/01/12 you shouldnt notice a diff - ZiNnYc 18:36:20 08/01/12 just to add...i believe those clamps are one use only (n/m) - ZiNnYc 12:38:45 07/31/12 Maybe an injector bleeding off fuel pressure - DAYTONAZ 19:45:41 08/02/12 Re: Maybe an injector bleeding off fuel pressure - Silens 20:14:25 08/02/12 Re: Maybe an injector bleeding off fuel pressure - Silens 17:50:54 08/07/12
Post a Followup	You cannot reply to this message because you are not logged in.