Subject	Side note. A hoist isn't necessary.
Posted by	ChrisMedaris on July 25, 2012 at 10:33 PM
	This message has been viewed 210 times.
In Reply To	Re: auto transmission swap to 5-speed posted by gbhrps on July 25, 2012 at 06:27 PM
Message	If you do the swap get the one piece braided clutch line to run from your master cylinder to slave cylinder. Pulling the motor is not necessary for the tranny swap. In fact I performed this swap last month in a single afternoon. Complete with proper pedals and clutch booster. Just get everything you need before you start. It's all about planning.
Follow Ups	auto transmission swap to 5-speed - jaredc17 16:17:19 07/25/12 Re: auto transmission swap to 5-speed - gbhrps 18:27:53 07/25/12 Side note. A hoist isn't necessary. - ChrisMedaris 22:33:21 07/25/12 Re: Side note. A hoist isn't necessary. - starscreamzx 13:53:42 07/27/12 I used the existing harness to get the reverse lights. - ChrisMedaris 07:23:16 07/28/12
Post a Followup	You cannot reply to this message because you are not logged in.