Subject	Low Beams and grounding at the switch
Posted by	Silens on July 19, 2012 at 5:23 PM
	This message has been viewed 206 times.
Message	Quick question. I'm working on fixing my headlight issue. My high beams work, but when I switch the switch to low beam only nothing comes on. I tested the switch out by grounding the pink and pin/black wires to the chassis and the low beams came on. I pulled the left pod apart and cleaned and checked all the internal contacts and they all look ok. Any suggestions where I can look to figure out where the grounding issue is? I have been under the hood a lot recently and I may have missed a harness ground or something? Thanks as always for the help!
Follow Ups	Low Beams and grounding at the switch - Silens 17:23:06 07/19/12 Do your dash lights come on? If not - check the Illumn Fuse - jzack 18:31:42 07/19/12 Re: Do your dash lights come on? If not - check the Illumn Fuse - Silens 19:11:44 07/19/12 Re: Low Beams and grounding at the switch - Silens 22:20:01 07/19/12 Re: Low Beams and grounding at the switch - Silens 23:37:07 07/19/12
Post a Followup	You cannot reply to this message because you are not logged in.