Subject	Timing Belt Replacement... HELP!
Posted by	CalebsZ on July 11, 2012 at 5:08 PM
	This message has been viewed 392 times.
Message	So I got my timing belt, drive belts, and water pump replaced. Before the car ran very smooth with no problems, but now when I'm stopped the car has a very rough idle and the engine seems to shake. It's so noticeable I can feel it while I'm just sitting in the seat. The shop I had it done at looked over everything again and can't figure out what the problem is. Vacuum hoses have been checked. I decided it could be a bad harness connection? Maybe ECU codes? Or CAS and TPS connections? I've also heard that maybe the timing belt requires a counterweight??? Please Help!!!!
Follow Ups	Timing Belt Replacement... HELP! - CalebsZ 17:08:28 07/11/12 If the car before ran good, it should come out from the - CmyZ 17:30:44 07/11/12 They goofed up your timing. - sandmanz32 17:51:00 07/11/12 What reading does a timing light give? Maybe worth the - jzack 18:29:09 07/11/12 Yeah your timing is off (n/m) - z-u-later 20:07:53 07/11/12 Re: Timing Belt Replacement... HELP! - ALee 23:53:40 07/11/12 You need to get a timing light on it and check it. - Draker (Eugene, OR) 10:45:07 07/12/12 Re: You need to get a timing light on it and check it. - rhombicblue 12:47:51 07/12/12 sounds like jumped a tooth.. didnt set it up correctly. (n/m) - Drk93TT 16:20:20 07/15/12
Post a Followup	You cannot reply to this message because you are not logged in.