Subject	Have you checked for codes?
Posted by	90GoldZ on June 24, 2012 at 12:51 PM
	This message has been viewed 127 times.
In Reply To	hi, im having a problem figuring out why my z isnt posted by z32z on June 24, 2012 at 12:09 PM
Message	Boost leak test? What plugs are in the motor and what gap? If your profile is up to date, and you still have the greddy kit w/external gates...are your wastegates opening up at all? Greddy boost controllers can be a pain to fine tune (I'm assuming you have the profec B-spec 2), especially if you don't have the vacuum lines for the solenoid routed properly. Have you checked the boost solenoid for proper function? There's a lot of things or just A simple thing that could be keeping your Z from running lie it's supposed to.
Follow Ups	hi, im having a problem figuring out why my z isnt - z32z 12:09:40 06/24/12 Have you checked for codes? - 90GoldZ 12:51:10 06/24/12 Re: Have you checked for codes? - z32z 13:36:33 06/24/12 How are you checking the timing on it? - 90GoldZ 14:29:17 06/24/12 I used a test wire on coil pack #1. (n/m) - z32z 14:59:12 06/24/12 >>>>>>> - 90GoldZ 16:12:31 06/24/12
Post a Followup	You cannot reply to this message because you are not logged in.