Subject	90NA Still have air in brake system...
Posted by	Havoc300 (Chicago) on June 12, 2012 at 9:29 PM
	This message has been viewed 211 times.
Message	So I bled the brakes again, along with the ABS Module. There is still a considerable amount of air in the front brakes. I've gone through a pint of fluid in the resevoir. When depressing the brake pedal, I can hear a slight hum and a kind of slurping sound at the Master Cylinder/Power Booster. When looking down in the resevoir while depressing the pedal, small bubbles can be seen at the rear of the resevoir near the brake booster. There is a slight rusting where the master cylinder and booster mount. There are no visible signs of leaks around the master cylinder. When the brake pedal is depressed there is very little pressure when the the car is idle or off. Thanks,
Follow Ups	90NA Still have air in brake system... - Havoc300 (Chicago) 21:29:39 06/12/12 What is process and wheel sequence being used for >> - ZUL8TR 10:03:10 06/13/12 Sequence is Pass Rear, Driver Rear, Pass Frt, Driver Frt, - Havoc300 (Chicago) 16:15:45 06/15/12 Try what I suggested with pressure and/or gravity bleed>> - ZUL8TR 18:51:21 06/15/12 What do you mean by the master cylinder being sealed? (n/m) - Havoc300 (Chicago) 16:29:31 06/16/12 Is it leaking brake fluid at the brake peddle plunger>> - ZUL8TR 15:57:00 06/17/12
Post a Followup	You cannot reply to this message because you are not logged in.