Subject	injector ohm test.
Posted by	jjames69 on June 11, 2012 at 7:50 PM
	This message has been viewed 792 times.
Message	my car has been running rough lately. i'm trying to do an ohm test the injectors. i bought an auto-ranging dmm from home depot. i pulled the connector off the injectors. the injectors have three prongs. i get a reading on the two prongs on my left only. i got a reading of .6 ohms on 5 of the injectors. i didn't test the one under the balance tube. i read that the injectors should test between 10-14 ohms. it seems a odd that all the injectors are testing below 10 ohms and all are .6ohms. the multimeter seems to be working fine. any suggestions?
Follow Ups	injector ohm test. - jjames69 19:50:44 06/11/12 you must be reading coil packs, injectors have 2 prongs (n/m) - jlag 21:13:54 06/11/12 ok , i guess they're the smaller ones under the cover - jjames69 21:47:24 06/11/12 Only disadvantage to testing them that way -- no - jzack 23:09:03 06/11/12 ok , i guess they're the smaller ones under the cover - jjames69 22:02:14 06/11/12 What is year and model of the Z? Early Z's had terrible>> - ZUL8TR 08:16:53 06/12/12 its a 93. looks like you squeeze and they slide off - jjames69 09:10:57 06/12/12 We have you covered on replacement clips - Chuck@Z1 10:06:50 06/12/12 read 42 ohm on #4 - jjamez 11:20:45 06/12/12
Post a Followup	You cannot reply to this message because you are not logged in.