Subject	You need a EPROM chip tuned to StageIII, not the complete
Posted by	Gordo 93TT Daytona on June 10, 2012 at 10:37 AM
	This message has been viewed 174 times.
In Reply To	looking to build my stock 1990 tt posted by Frichman on June 10, 2012 at 01:06 AM
Message	ECU. However, the ECU needs to be socketed for the EPROM which is going to be an extra charge for labor. Notwithstanding I just told you you only need the chip, would begin to look in the Classifieds for a used StageIII ECU, already socketed, w/ a stageIII chip currently installed. Ten years ago, used StageIII chips would cost upwards of $250. Today they are pretty easy to find for around $100. You should be able to get the complete ECU setup for less than $200. Based on the types of questions you're asking, I think you need to do some more homework on upgrading. It is good that you are asking questions first, however, lots of what you will need to know is already been answered many many times and is found in the FAQ section of this forum. Good luck. _________________________________________________
Follow Ups	looking to build my stock 1990 tt - Frichman 01:06:54 06/10/12 You need a EPROM chip tuned to StageIII, not the complete - Gordo 93TT Daytona 10:37:29 06/10/12
Post a Followup	You cannot reply to this message because you are not logged in.