Subject	you need a non hicas ps resivor and the pump.....
Posted by	LivinTheDream on June 02, 2012 at 2:44 PM
	This message has been viewed 240 times.
In Reply To	Hicas delete question.. posted by 300z-shaat on June 01, 2012 at 08:14 AM
Message	By removing the hicas spec pump res and selenoid it will remove all.the unneeded lines. There wil be just the j hose from the res to the pump the pump will have the high pres line to the rack and then the rack will have the return line which runs around the condenser and back up to the res via the smaller rubber line from the hard line. Did u just get the delete bar or the suspension arms as well? And why are u removing it just curious "torque gets you off the line...& hp gets you over the line." - TTKeeper
Follow Ups	Hicas delete question.. - 300z-shaat 08:14:02 06/01/12 you need a non hicas ps resivor and the pump..... - LivinTheDream 14:44:25 06/02/12 Actually... - soulpwr 23:21:00 06/04/12
Post a Followup	You cannot reply to this message because you are not logged in.