Subject	stereo upgrade
Posted by	reaperz1 on May 28, 2012 at 8:22 PM
	This message has been viewed 213 times.
Message	I had a kenwood stereo put but the driver front speaker was the only one working so I am going to replace all speakers with alpine. My question is when you get rid of the bose amps will i have to run wire straight from the head unit to the speaker or can I use the wires already there in the box. do not know how it is wired up. just want to be prep before I start thankyou
Follow Ups	stereo upgrade - reaperz1 20:22:41 05/28/12 I ran wires all the way to the head unit...heres a writeup - JoshE300zxTT 21:24:40 05/28/12 You can use the stock wiring if you're just driving the - JBender 23:59:32 05/28/12 Re: stereo upgrade - reaperz1 00:34:33 05/30/12 I used the stock wires too. When you remove the Bose - Zblackbeast 08:50:31 05/30/12
Post a Followup	You cannot reply to this message because you are not logged in.