Subject	Some videos of my clutch fork movement
Posted by	rojoloco (VA Beach) on May 28, 2012 at 7:51 PM
	This message has been viewed 420 times.
Message	[ http://www.youtube.com/watch?v=1OT4cEJyFs0 ] [ http://www.youtube.com/watch?v=BelwZOQhJS8 ] [ http://www.youtube.com/watch?v=zaUZQ2lm4Fk ] I was a bit off in my previous measurement when I said it was moving just a bit less than 1". I was measuring it from the side of the car with it on the ground before. Today, I got underneath it. The fork is traveling 5/8". Is this enough movement? The TOB is firmly attached to the fork. The pivot bolt is also firmly in the plate. The threads didn't come loose at all as previously suspected. With the slave cylinder removed, the fork has some extra travel forward but this is normal. Once I got to put the slave back on, I just have to compress it and everything is snug. I could even see the TOB pressing against the pressure plate as the pedal was pressed. ----------------------------------------------------- Never Play Leapfrog With A Unicorn!!! WILL JSCHRAUWEN EVER ANSWER MY QUESTION? John, stop it! You are not allowed in AMS threads and you know it. -- marty1mc Do yourself a favor and just worry about your own car. I don't see what everyone is so worried about anyway. If someone else wants to perform a modification that you believe will destroy the value, cheapen the Z32 or whatever you can't sit on your hands about, wouldn't that make your tastefully-modified, white bread Z32 more rare and valuable? -- BradZ (FL) on December 23, 2007 at 12:19 PM The unicorn gets its revenge... -- Scotts94z32 on September 19, 2006 at 11:12 AM CLICK FOR DETAILS ABOUT BUYING A ZAMA POSTER!!!!
Follow Ups	Some videos of my clutch fork movement - rojoloco (VA Beach) 19:51:55 05/28/12 That looks fine to me but doesn't sound good. Maybe a - Evan_Wright (Ca) 20:34:52 05/28/12 It's sounded like that for quite some time. - rojoloco (VA Beach) 21:40:58 05/28/12 Re: It's sounded like that for quite some time. - aliaZ 06:11:00 05/29/12 There are no pulses at all. - rojoloco (VA Beach) 07:59:11 05/29/12 What about sitting on the trailer could cause your friction - doug8867 08:50:01 05/29/12 what happens when you hold the pedal to the floor? - aliaZ 15:33:08 05/29/12 It stays fully extended. - rojoloco (VA Beach) 17:25:39 05/29/12 Sounds exactly like mine. Don't know about 5/8". - OverZealous (CT) 22:05:33 05/28/12 I just got off the phone with Joe Allison. - rojoloco (VA Beach) 20:40:10 05/29/12 Wow, that would be wild if that is the case. - doug8867 10:05:14 05/30/12 Actually it is extremely common with feramic material..... - Greg D. (Specialty-Z) 10:27:24 05/30/12 A local guy had it happen to his Z32 as well. - rojoloco (VA Beach) 11:56:40 05/30/12 It looks like that was it. - rojoloco (VA Beach) 21:08:24 05/31/12 Great, glad you figured it out. Who would have guessed, eh? (n/m) - my91z 21:10:17 05/31/12 I meant to e-mail you back. - rojoloco (VA Beach) 13:40:03 06/01/12 Great. Hope it came unstuck in one piece and you - doug8867 07:10:36 06/01/12 Huge 2nd! (n/m) - rojoloco (VA Beach) 13:40:49 06/01/12 My guess..... - Greg D. (Specialty-Z) 10:20:59 05/30/12 I'd say that is a pretty good guess (n/m) - aliaZ 11:40:19 05/30/12 2nd. :-) Finally, a plausible explanation for what - doug8867 11:43:31 05/30/12 This is pretty much what Joe Allison thinks happened. - rojoloco (VA Beach) 11:55:03 05/30/12 I think they were doing smokey burn outs and slipping - Joe@ZSpeedperformance 21:39:41 05/31/12 Feramic does not seize as easy as that but is probably - Joe@ZSpeedperformance 01:05:07 05/31/12 Re: Feramic - Greg D. (Specialty-Z) 14:21:20 06/02/12 I disagree with much of what you said here - Joe@ZSpeedperformance 05:58:35 06/03/12
Post a Followup	You cannot reply to this message because you are not logged in.